Whole-House Assessment in Mystic, CT: Sagging Girders and a Ridge Beam
An 1800s three-family in Mystic, in Stonington. Permanent posts under every girder, hangers where the tenons pulled, room for the ridge post's footing.
Structural Engineering in Groton, CT
Wall removals, decks, dormers, beams, additions, and inspections. A licensed CT engineer who inspects in person and walks you through the answer.
The Wall Guy provides licensed structural engineering for homes and small commercial buildings in Groton and throughout New London County. That covers load-bearing wall removals, decks and porches, dormers, beam and header sizing, additions, foundation evaluations, framing repair, and structural inspection letters. Travis Busch, P.E. (CT License #PEN.0038729) handles every project personally, from the site visit to the stamped letter.
How I Take On Projects
1 One call. Describe the project in a sentence or two. I'll tell you straight whether you need an engineer at all, and if you do, you get the price on that call.
2 One fixed price, and a date. The number is set before any work starts and it covers the job start to finish, including revisions your building department asks for. We put the site visit on the calendar while we're on the phone.
3 Photos before I come out. Text me whatever photos you have before the visit. I'll go through them the night before, so I show up already knowing your house.
4 The visit. I take my own measurements, photos, and framing details and check the structure myself.
5 Stamped and delivered. I run the analysis properly at my desk, then call you and your contractor to walk through the options. Your permit-ready stamped letter typically follows within a few business days of the visit.
About Groton, CT
Groton is one of Connecticut's larger urban communities, home to approximately 38,411 residents in New London County. Much of the housing stock in Groton dates to the 1950s-1970s era, which shapes the types of structural work homeowners encounter today. Most homes feature wood-frame platform construction on poured concrete foundations. The most common home styles here are ranches, capes, and split-levels. Engineers designing in Groton must account for a ground snow load of 25 PSF and a frost depth of 36 inches. Both factor directly into beam sizing and foundation design here.
Groton Building Department
Groton Building Department
295 Meridian Street, Groton, CT 06340
Phone: 860-446-4104
Hours: Mon-Fri 8:00 AM - 4:00 PM
Connecticut state code requires a licensed Professional Engineer to design structural modifications including load-bearing wall removal. Contact the Groton building department to confirm local permit requirements.
Recent Projects in Groton
Completed structural engineering work with the framing details, member sizes, and site findings from each job.
Load-Bearing Wall Removal in Ledyard, CT: 44 ft Opening, Independent Beam Review and PE Stamp
Independent review and stamped calculations for a rear addition where 44 ft of first-floor bearing wall came out in two spans on a four-ply 20 in LVL, plus a sealed revision when the framing changed.
Engineering Design Parameters for Groton, CT
| Parameter | Value |
|---|---|
| Ground Snow Load | 25 PSF |
| Wind Speed | 120 MPH |
| Frost Depth | 36 inches |
| Applicable Code | IRC 2021 / IBC 2021 (CT amendments) |
Serving Groton and Surrounding Communities
The Wall Guy also serves homeowners and contractors in nearby communities including New London, Waterford, Ledyard, and Stonington. Every town in Connecticut gets the same on-site engineering service.
Frequently Asked Questions About Structural Engineering in Groton, CT
Do I need a structural engineer for my project in Groton?
If the work is structural (removing a load-bearing wall, adding a dormer, changing framing, building a deck, or repairing a foundation) Connecticut requires PE-stamped engineering before the town issues a permit. Not sure whether your project counts? Call me and describe it. I'll tell you straight, even if the answer is that you don't need me.
How long does it take to get a stamped letter in Groton?
We schedule the site visit for a time that works for you. The stamped letter typically follows within a few business days of the visit. On a tight schedule? Say so when you call and I'll tell you honestly whether I can hit it.
How much does structural engineering cost in Groton?
For a typical load-bearing wall removal, the stamped structural letter is one fixed price, quoted on the first call before any work starts, site visit included. Other projects (dormers, decks, additions, inspections) are quoted by phone after you describe the job. That price covers the job start to finish, including any revisions your building department asks for. Call (860) 519-6009 and describe your project.
How do I get a building permit for structural work in Groton?
Contact the Groton Building Department at 860-446-4104 to confirm permit requirements for your project. Most structural work (wall removals, dormers, additions, deck framing) requires a building permit and a PE-stamped letter or plan, which I provide.
Ready to Start Your Project in Groton?
Call or text Travis at (860) 519-6009, or email travis@thewallguy.com. Describe the project in a sentence and you get one fixed price, quoted on the first call, before any work starts.