Footings on Blasted Ledge and a Steel Beam Redesign in Barkhamsted, CT
Remote structural package for a new house on blasted granite in Barkhamsted. A compacted stone bed under the footings and three W16 beams.
Structural Engineering in Kent, CT
Wall removals, decks, dormers, beams, additions, and inspections. A licensed CT engineer who inspects in person and walks you through the answer.
The Wall Guy provides licensed structural engineering for homes and small commercial buildings in Kent and throughout Litchfield County. That covers load-bearing wall removals, decks and porches, dormers, beam and header sizing, additions, foundation evaluations, framing repair, and structural inspection letters. Travis Busch, P.E. (CT License #PEN.0038729) handles every project personally, from the site visit to the stamped letter.
How I Take On Projects
1 One call. Describe the project in a sentence or two. I'll tell you straight whether you need an engineer at all, and if you do, you get the price on that call.
2 One fixed price, and a date. The number is set before any work starts and it covers the job start to finish, including revisions your building department asks for. We put the site visit on the calendar while we're on the phone.
3 Photos before I come out. Text me whatever photos you have before the visit. I'll go through them the night before, so I show up already knowing your house.
4 The visit. I take my own measurements, photos, and framing details and check the structure myself.
5 Stamped and delivered. I run the analysis properly at my desk, then call you and your contractor to walk through the options. Your permit-ready stamped letter typically follows within a few business days of the visit.
About Kent, CT
Kent is a rural Connecticut town with a population of approximately 2,865, situated in Litchfield County. Much of the housing stock in Kent dates to the pre-1900 to 1960s era, which shapes the types of structural work homeowners encounter today. Most homes feature wood-frame platform and balloon frame mix construction on stone and poured concrete foundations. The most common home styles here are colonials, farmhouses, and capes. Engineers designing in Kent must account for a ground snow load of 40 PSF and a frost depth of 42 inches. Both factor directly into beam sizing and foundation design here. Kent includes a historic district, which may introduce additional review requirements for structural modifications. Repair work on a Register-listed house there may also qualify for the state historic homes tax credit.
Kent Building Department
Connecticut state code requires a licensed Professional Engineer to design structural modifications including load-bearing wall removal. Contact the Kent building department to confirm local permit requirements.
Recent Projects in Litchfield County
Completed structural engineering work with the framing details, member sizes, and site findings from each job.
Engineering Design Parameters for Kent, CT
| Parameter | Value |
|---|---|
| Ground Snow Load | 40 PSF |
| Wind Speed | 105 MPH |
| Frost Depth | 42 inches |
| Applicable Code | IRC 2021 / IBC 2021 (CT amendments) |
Serving Kent and Surrounding Communities
The Wall Guy also serves homeowners and contractors in nearby communities including Sharon, Cornwall, Warren, Washington, New Milford, and Sherman. Every town in Connecticut gets the same on-site engineering service.
Frequently Asked Questions About Structural Engineering in Kent, CT
Do I need a structural engineer for my project in Kent?
If the work is structural (removing a load-bearing wall, adding a dormer, changing framing, building a deck, or repairing a foundation) Connecticut requires PE-stamped engineering before the town issues a permit. Not sure whether your project counts? Call me and describe it. I'll tell you straight, even if the answer is that you don't need me.
How long does it take to get a stamped letter in Kent?
We schedule the site visit for a time that works for you. The stamped letter typically follows within a few business days of the visit. On a tight schedule? Say so when you call and I'll tell you honestly whether I can hit it.
How much does structural engineering cost in Kent?
For a typical load-bearing wall removal, the stamped structural letter is one fixed price, quoted on the first call before any work starts, site visit included. Other projects (dormers, decks, additions, inspections) are quoted by phone after you describe the job. That price covers the job start to finish, including any revisions your building department asks for. Call (860) 519-6009 and describe your project.
Are there additional requirements for structural work in Kent's historic district?
Yes. Projects in the historic district may require Historic District Commission review in addition to a standard building permit. This can add time to the approval process. I'm familiar with the requirements and can help you navigate the process. If the house is also on the State or National Register, repair work may qualify for the state's 30% historic homes tax credit. See structural repair for historic homes.
How do I get a building permit for structural work in Kent?
Contact the Kent Building Department at 860-927-4872 to confirm permit requirements for your project. Most structural work (wall removals, dormers, additions, deck framing) requires a building permit and a PE-stamped letter or plan, which I provide.
Does Kent's snow load affect structural design?
Yes. Kent has a ground snow load of 40 PSF, which means beams, ridge members, and headers designed here must be sized to carry significant snow loads from the roof structure above. This is factored into every design I provide.
Ready to Start Your Project in Kent?
Call or text Travis at (860) 519-6009, or email travis@thewallguy.com. Describe the project in a sentence and you get one fixed price, quoted on the first call, before any work starts.